China Best Sales Rotary Direct Industrial Electric Air Oil Free CHINAMFG (KE90-10ET) wholesaler

Product Description

The ETC oil-free conversion technology opens up completely new possibilities for providing oil free compressed air in meeting with ISO 8573-1 Class 0 quality standard.

When it comes to holding down up-front operational costs, converter technology is ideally suited for the provision of entirely oil free compressed air. And it is dependable too: Penetration of oil into the compressed air network is absolutely impossible!

Operating costs are extremely low because no costly checkups are required. Commonly occurring risks such as oil penetration have been discarded, and frequent replacement of component elements as with filters has been completely eliminated.

Features of CHINAMFG ETC Series Oil Free Rotary Screw Air Compressor
1. Air quality to ISO8573-1 Class 0 standard with TUV certificate on request
2. Proven Eco-Tec Oil Free Converter technology from Germany and over thousands successful installation reference worldwide
3. Single stage airend design for easy and cost saving maintenance
4. T. E. F. C. IP55 class F electric motor in compliance with IEC/DIN standards
5. Modern concept suction valve with energy saving modulation control as option
6. Intelligent PLC control panel with sequential / remote control functions

7. Reliable automatic control box with “Siemens” contactors

8. High efficiency aftercooler (air- or water- cooled available)

Proper disposal is no problem either as a matter of fact, in terms of oil content the condensate is of drinking water quality! In the ETC converter the long hydrocarbon chains of the residual oil contained in the compressed air are broken up into harmless carbon dioxide and water, i.e. substances occurring naturally in the air. 

The catalytic converter incorporates a container with compact granulated pellets through which the compressed air circulates. This process breaks down and converts both oil droplets and oil vapors. The condensate that forms afterwards is therefore completely oil free and can be disposed of much less expensively and without the need for additional treatment. 

Oil/hydrogen concentration is below 0,0571 mg/m3. The addition of the catalytic converter guarantees class 1 compressed air (ISO 8573-1) for all applications where oil free compressed air is essential. 

ADEKOM (ASIA PACIFIC) LIMITED founded in the late 90’s is a specialized air/gas compressors and treatment system manufacturer with headquarter in Hong Kong. Its partners located in Vicenza, Italy and Germering, Germany are the world’s leading manufacturers with global recognition and experience in designing, manufacturing and marketing of rotary screw air/gas compressors for decades. QUALITY, RELIABILITY and ENERGY EFFICIENCY have been the main objectives of serving customers all over the world. CHINAMFG follows the company core of its European partners, is committed to the research & development, quality assurance and satisfaction of customers’ needs. Today, what CHINAMFG can do is not just to supply the best products to the market, but to provide THE TOTAL SOLUTION TO YOUR NEEDS!

CONTACT US

Asia Pacific Market: Spencer Lau (Ms.)

European/ Middle Eastern/ African Market: Echo Lok (Ms.)

American Market: Alice Kwok (Ms.)

 
 

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Air Cooling
Power Source: AC Power
Cylinder Position: Angular
Structure Type: Closed Type
Installation Type: Stationary Type
Customization:
Available

|

air compressor

What Is the Role of Air Dryers in Oil-Free Air Compressor Systems?

Air dryers play a crucial role in oil-free air compressor systems by removing moisture from the compressed air, ensuring dry and moisture-free output. Here’s a detailed explanation of the role of air dryers in oil-free air compressor systems:

1. Moisture Removal:

One of the primary functions of air dryers in oil-free air compressor systems is to remove moisture from the compressed air. During the compression process, atmospheric air is compressed, leading to an increase in temperature. As the compressed air cools down, the water vapor present in the air can condense, resulting in the formation of liquid water. Moisture in the compressed air can cause a range of issues, including corrosion, damage to pneumatic equipment, reduced efficiency in downstream processes, and contamination of products or processes. Air dryers effectively remove this moisture, ensuring that the compressed air remains dry and free from water vapor.

2. Condensation Prevention:

Air dryers also help prevent condensation from occurring within the compressed air system. By removing moisture from the compressed air, air dryers minimize the chances of condensation forming in the compressed air lines, storage tanks, and downstream equipment. Condensation can lead to the accumulation of water, which can cause blockages, corrosion, and other operational issues. Air dryers help maintain the integrity and reliability of the compressed air system by preventing condensation-related problems.

3. Protection of Equipment:

Moisture in the compressed air can be detrimental to pneumatic equipment and tools. Air dryers help protect this equipment by ensuring that the air supplied is dry and free from moisture. Dry air prevents corrosion of internal components, extends the lifespan of pneumatic tools, and helps maintain their optimal performance. By removing moisture, air dryers contribute to the overall reliability and efficiency of the oil-free air compressor system.

4. Purification of Compressed Air:

Air dryers also aid in the purification of compressed air by removing impurities and contaminants, including water vapor, oil droplets, and solid particles. While the primary purpose of air dryers is to remove moisture, they often incorporate additional filtration stages, such as coalescing filters or desiccant beds, to capture and remove other impurities. These filtration stages work in conjunction with the drying process to deliver clean, dry, and purified compressed air that meets the required air quality standards.

5. Optimal Performance:

Properly dried and moisture-free compressed air ensures optimal performance in various applications. In industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting, where air quality is critical, the use of air dryers is essential to meet specific air purity requirements. Dry compressed air enhances the efficiency and reliability of pneumatic systems, reducing the risk of malfunctions, downtime, and product contamination.

It’s important to note that different types of air dryers are available for oil-free air compressor systems, including refrigerated dryers, desiccant dryers, and membrane dryers. Each type has its own operating principles and suitability for different applications. The selection of the appropriate air dryer depends on factors such as the required level of dryness, the volume of compressed air, operating conditions, and specific industry requirements.

By incorporating air dryers into oil-free air compressor systems, operators can achieve and maintain dry, moisture-free compressed air, ensuring the reliability, efficiency, and integrity of downstream processes and equipment.

air compressor

How Do You Troubleshoot Common Problems with Oil-Free Compressor Systems?

To troubleshoot common problems with oil-free compressor systems, follow these steps:

1. Check Power Supply:

Ensure that the compressor system is properly connected to a reliable power supply. Check for any tripped circuit breakers or blown fuses. Verify that the power switch is in the “on” position.

2. Inspect Air Filters:

Examine the air filters to see if they are dirty or clogged. Restricted airflow due to dirty filters can cause the compressor to overheat or operate inefficiently. Clean or replace the filters as necessary.

3. Check for Air Leaks:

Inspect the entire compressed air system for air leaks. Leaks can lead to reduced system pressure and inefficient operation. Use a leak detection solution or an ultrasonic leak detector to locate and repair any leaks in the system.

4. Monitor Pressure Gauges:

Observe the pressure gauges on the compressor system. If the pressure is consistently below the desired level, it could indicate a problem with the compressor’s output or a leak in the system. Ensure that the pressure relief valves are not open or malfunctioning.

5. Check for Excessive Heat:

Monitor the temperature of the compressor and associated components. If the system is running excessively hot, it may indicate a problem with cooling or lubrication. Ensure that the cooling fans are operating correctly and that the compressor is receiving proper lubrication, if applicable.

6. Inspect Drains and Condensate Management:

Check the drains and condensate management system for proper functioning. Accumulated condensate can cause issues such as water contamination or pressure drops. Ensure that drains are clear and functioning, and that the condensate management system is operating as intended.

7. Review Maintenance Records:

Refer to the maintenance records of the compressor system. Ensure that routine maintenance tasks, such as filter replacements, oil changes (if applicable), and component inspections, have been performed according to the manufacturer’s recommendations. Lack of proper maintenance can contribute to various issues in compressor systems.

8. Consult Manufacturer’s Documentation:

Refer to the manufacturer’s documentation, such as the user manual or troubleshooting guide, for specific guidance on diagnosing and resolving common problems with the oil-free compressor system. Manufacturers often provide detailed troubleshooting steps and recommendations tailored to their specific equipment.

9. Seek Professional Assistance:

If the troubleshooting steps do not resolve the issue or if you are uncertain about performing any maintenance or repairs, it is advisable to seek professional assistance. Contact the manufacturer’s customer support or consult a qualified technician with expertise in oil-free compressor systems.

Remember to prioritize safety when troubleshooting compressor systems. Follow proper lockout/tagout procedures and adhere to all safety guidelines provided by the manufacturer.air compressor

Are Oil-Free Air Compressors Suitable for Food and Beverage Industries?

Yes, oil-free air compressors are highly suitable for the food and beverage industries and are widely used in various applications within these sectors. The clean and oil-free compressed air produced by these compressors is essential to maintain product quality, ensure food safety, and meet industry regulations. Here’s a detailed explanation of why oil-free air compressors are suitable for the food and beverage industries:

1. Preventing Contamination:

The primary advantage of oil-free air compressors in the food and beverage industries is the prevention of oil contamination. These industries have stringent hygiene and safety standards, and any contamination in the production process can compromise product quality and consumer health. Oil-free compressors eliminate the risk of oil particles entering the compressed air stream, ensuring that the compressed air used in various processes, such as packaging, filling, and bottling, is free from oil contamination.

2. Preserving Food Freshness:

Oil-free air compressors help maintain the freshness and quality of food products. In applications such as food packaging, where compressed air is used to create a protective atmosphere or seal packaging, the absence of oil eliminates the risk of oil residues affecting the taste, aroma, or shelf life of the packaged food. Oil-free compressors ensure that the compressed air used for these purposes is clean and does not introduce any unwanted flavors or odors.

3. Compliance with Food Safety Standards:

The food and beverage industries are subject to strict regulations and standards to ensure food safety. Oil-free air compressors help companies meet these requirements by providing clean, oil-free compressed air that adheres to food safety guidelines. Compressed air used in processes like air agitation, product drying, or pneumatic conveyance must be free from contaminants to prevent cross-contamination and maintain hygienic conditions throughout the production chain.

4. Minimizing Product Loss and Waste:

In the food and beverage industries, any product loss or waste can have significant financial and environmental implications. Oil contamination in compressed air can lead to product spoilage, resulting in costly product losses and waste. By using oil-free air compressors, the risk of product contamination is minimized, helping to reduce waste and improve overall production efficiency.

5. Ensuring Equipment Performance and Longevity:

Oil-free air compressors help protect sensitive food and beverage production equipment from oil-related issues. Oil contamination can damage pneumatic valves, seals, and other components, leading to equipment malfunction, unplanned downtime, and costly repairs. Oil-free compressors eliminate these risks, ensuring the longevity and reliable performance of the production equipment.

6. Meeting Industry-Specific Requirements:

The food and beverage industries have specific requirements for compressed air quality and purity. Oil-free air compressors are designed to meet these industry-specific requirements, often complying with standards such as ISO 8573-1 Class 0, which certifies the air as completely oil-free. This certification provides assurance that the compressed air meets the strictest quality standards and is suitable for critical applications in these industries.

By using oil-free air compressors, companies in the food and beverage industries can maintain the highest standards of product quality, hygiene, and safety. It is essential to select oil-free compressors specifically designed for these industries and follow proper maintenance protocols to ensure consistent performance and compliance with industry regulations.

China Best Sales Rotary Direct Industrial Electric Air Oil Free CHINAMFG (KE90-10ET)   wholesaler China Best Sales Rotary Direct Industrial Electric Air Oil Free CHINAMFG (KE90-10ET)   wholesaler
editor by CX 2024-04-17

TAGs:

Recent Posts