China Freezing Equipment Cold Room Indoor Unit DJ Evaporator Coil Condenser Refrigerator Air Cooler Evaporator and Compressor wholesaler

Solution Description

Solution Description

 

 

 

Product Parameters

 

Scope of software:

DL higher temperature kind (area temperature 12 to -2 degrees Celsius) enthusiast space 4.5mm
DD medium temperature variety (great temperature -2 to -eighteen levels Celsius) fan space 6.0mm
DJ reduced temperature type (great temperature -18 to -31 degrees Celsius) enthusiast room 9.0mm

The shell of cold room evaporator is generally created of plastic-sprayed iron plate, foodstuff-quality stainless steel plate or embossed aluminum plate. The cold room evaporator has a lot of positive aspects these kinds of as massive heat exchange, handy and straightforward, substantial corrosion resistance, and gorgeous physical appearance. The heat trade coil of the air cooler typically uses inside threads. The heat exchange copper tube is in near contact with the aluminum fin by means of a hydraulic tube expander, thereby reducing the make contact with length and bettering the heat transfer coefficient.
Right after the cold area evaporator is developed, it goes by way of a strict decontamination process to make sure the cleanliness of the top quality technique. The cold area evaporator uses a higher-performance outer rotor motor. The motor of this structure has the benefits of big air quantity, substantial wind speed, and extended service life. The cold room evaporator should be CZPT to Install explosion-evidence motors in accordance to diverse needs.

DL Series

 

Model Ability
(W)
Cooling floor
(m2)
Fin Area
(mm)
Enthusiast HeaterVoltage
(v)
Qty Dimensions
(mm)
Air movement
(m3/h)
Voltage
(v)
DL-2./ten 2000 ten 4.5 1 300 1700 380 220
DL-3./fifteen 3000 15 four.five 2 300 3400 380 220
DL-5./25 5000 25 4.five three 400 5100 380 220
DL-8./forty 8000 40 four.5 2 400 8000 380 220
DL-11.2/55 11200 fifty five 4.5 two five hundred 8000 380 220
DL-sixteen.2/eighty 16200 eighty 4.five 2 five hundred 12000 380 220
DL-21./one hundred and five 21000 a hundred and five four.5 2 500 12000 380 220
DL-25./one hundred thirty five 25000 135 four.five three 500 18000 380 220
DL-32.6/one hundred sixty 32600 one hundred sixty 4.5 3 500 18000 380 220
DL-37.6/185 37600 185 4.5 three five hundred 18000 380 220
DL-42.7/220 42700 220 4.5 four five hundred 24000 380 220
DL-fifty./250 50000 250 four.five four 500 24000 380 220
DL-fifty five./280 55000 280 four.5 four 500 24000 380 220
DL-sixty./three hundred 60000 three hundred 4.five 4 five hundred 24000 380 220
DL-66./330 66000 330 four.five four 500 24000 380 220
DL-70./375 70000 375 4.five 4 600 44000 380 220
DL-82./410 82000 410 four.5 4 600 44000 380 220
DL-ninety four./470 94000 470 four.5 five 630 45000 380 220
DL-116./580 11600 580 4.5 five 630 45000 380 220

DD Series
 

Design Capability
(W)
Cooling surface
(m2)
Fin Room
(mm)
Admirer HeaterVoltage
(v)
Qty Size
(mm)
Air circulation
(mthree/h)
Voltage
(v)
DD-1.3/seven 1300 seven 6 one three hundred 1700 380 220
DD-2.2/12 2200 twelve 6 2 300 3400 380 220
DD-2.8/fifteen 2800 15 six 2 three hundred 3400 380 220
DD-3.7/22 3700 22 6 three 300 5100 380 220
DD-5.6/thirty 5600 30 6 2 four hundred 8000 380 220
DD-7.5/forty 7500 40 six 2 400 8000 380 220
DD-11.2/60 11200 60 6 two 500 12000 380 220
DD-14.9/80 14900 80 6 2 five hundred 12000 380 220
DD-eighteen.7/one hundred 18700 one hundred six three 500 18000 380 220
DD-22.4/120 22400 one hundred twenty six three five hundred 18000 380 220
DD-26.4/a hundred and forty 26400 a hundred and forty six 3 five hundred 18000 380 220
DD-30./one hundred sixty 30000 one hundred sixty 6 4 500 24000 380 220
DD-35./180 35000 one hundred eighty 6 4 500 24000 380 220
DD-37./200 37000 two hundred 6 4 500 24000 380 220
DD-40./220 40000 220 six 4 five hundred 24000 380 220
DD-46./250 46000 250 six four 500 24000 380 220
DD-fifty./275 50000 275 6 four 600 44000 380 220
DD-fifty seven./310 57000 310 six 5 600 44000 380 220
DD-sixty seven./360 67000 360 six 5 630 45000 380 220
DD-81./440 81000 440 six five 630 45000 380 220

DJ Series
 

Product Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Measurement
(mm)
Air circulation
(m3/h)
Voltage
(v)
DJ-1.2/eight 1200 8 9 two 300 3400 380 220
DJ-2.1/15 2100 fifteen nine three 300 5100 380 220
DJ-3.6/20 3600 twenty 9 2 four hundred 8000 380 220
DJ-4.6/30 4600 thirty nine 2 four hundred 8000 380 220
DJ-7.1/forty 7100 forty nine 2 five hundred 12000 380 220
DJ-8.9/fifty five 8900 fifty five nine 2 five hundred 12000 380 220
DJ-eleven.6/70 11600 70 nine 3 five hundred 18000 380 220
DJ-fourteen.3/85 14300 eighty five 9 three 500 18000 380 220
DJ-17.1/one hundred 17100 100 9 3 five hundred 18000 380 220
DJ-19.6/one hundred fifteen 19600 one hundred fifteen 9 4 five hundred 24000 380 220
DJ-22/one hundred thirty 22000 one hundred thirty nine four 500 24000 380 220
DJ-23/one hundred forty 23000 140 nine four five hundred 24000 380 220
DJ-twenty five/150 25000 150 9 four five hundred 24000 380 220
DJ-28/one hundred seventy 28000 170 nine four 500 24000 380 220
DJ-thirty/one hundred ninety 30000 190 nine 4 600 44000 380 220
DJ-35/210 35000 210 9 4 600 44000 380 220
DJ-forty one/250 41000 250 9 5 630 45000 380 220
DJ-50/three hundred 50000 three hundred 9 five 630 45000 380 220

 

Our Situation

 

Firm Profile

 

Production Approach

 

Packaging & Delivery

 

FAQ

Q1: Are you a factory or a trading firm?
A1: We have a manufacturing unit

Q2: Exactly where is your manufacturing unit located?
A2: Our manufacturing unit is positioned in HangZhou, ZheJiang province.

Q3: Is a sample available?
A3: Indeed, but the sample will be at your demand.

Q4: What is the main market place for your products?
A4: Our primary market is in Middle East, Southeast Asia,South The united states, Africa,South Asia and so on.

Welcome to make contact with us for far more details!

US $850-2,600
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Certification: CE, ISO
Color: White
Shipping Port: Guangzhou/Foshan/Shenzhen
Lead Time: 15 Days

###

Samples:
US$ 2980/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DL-2.0/10 2000 10 4.5 1 300 1700 380 220
DL-3.0/15 3000 15 4.5 2 300 3400 380 220
DL-5.0/25 5000 25 4.5 3 400 5100 380 220
DL-8.0/40 8000 40 4.5 2 400 8000 380 220
DL-11.2/55 11200 55 4.5 2 500 8000 380 220
DL-16.2/80 16200 80 4.5 2 500 12000 380 220
DL-21.0/105 21000 105 4.5 2 500 12000 380 220
DL-25.0/135 25000 135 4.5 3 500 18000 380 220
DL-32.6/160 32600 160 4.5 3 500 18000 380 220
DL-37.6/185 37600 185 4.5 3 500 18000 380 220
DL-42.7/220 42700 220 4.5 4 500 24000 380 220
DL-50.0/250 50000 250 4.5 4 500 24000 380 220
DL-55.0/280 55000 280 4.5 4 500 24000 380 220
DL-60.0/300 60000 300 4.5 4 500 24000 380 220
DL-66.0/330 66000 330 4.5 4 500 24000 380 220
DL-70.0/375 70000 375 4.5 4 600 44000 380 220
DL-82.0/410 82000 410 4.5 4 600 44000 380 220
DL-94.0/470 94000 470 4.5 5 630 45000 380 220
DL-116.0/580 11600 580 4.5 5 630 45000 380 220

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DD-1.3/7 1300 7 6 1 300 1700 380 220
DD-2.2/12 2200 12 6 2 300 3400 380 220
DD-2.8/15 2800 15 6 2 300 3400 380 220
DD-3.7/22 3700 22 6 3 300 5100 380 220
DD-5.6/30 5600 30 6 2 400 8000 380 220
DD-7.5/40 7500 40 6 2 400 8000 380 220
DD-11.2/60 11200 60 6 2 500 12000 380 220
DD-14.9/80 14900 80 6 2 500 12000 380 220
DD-18.7/100 18700 100 6 3 500 18000 380 220
DD-22.4/120 22400 120 6 3 500 18000 380 220
DD-26.4/140 26400 140 6 3 500 18000 380 220
DD-30.0/160 30000 160 6 4 500 24000 380 220
DD-35.0/180 35000 180 6 4 500 24000 380 220
DD-37.0/200 37000 200 6 4 500 24000 380 220
DD-40.0/220 40000 220 6 4 500 24000 380 220
DD-46.0/250 46000 250 6 4 500 24000 380 220
DD-50.0/275 50000 275 6 4 600 44000 380 220
DD-57.0/310 57000 310 6 5 600 44000 380 220
DD-67.0/360 67000 360 6 5 630 45000 380 220
DD-81.0/440 81000 440 6 5 630 45000 380 220

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DJ-1.2/8 1200 8 9 2 300 3400 380 220
DJ-2.1/15 2100 15 9 3 300 5100 380 220
DJ-3.6/20 3600 20 9 2 400 8000 380 220
DJ-4.6/30 4600 30 9 2 400 8000 380 220
DJ-7.1/40 7100 40 9 2 500 12000 380 220
DJ-8.9/55 8900 55 9 2 500 12000 380 220
DJ-11.6/70 11600 70 9 3 500 18000 380 220
DJ-14.3/85 14300 85 9 3 500 18000 380 220
DJ-17.1/100 17100 100 9 3 500 18000 380 220
DJ-19.6/115 19600 115 9 4 500 24000 380 220
DJ-22/130 22000 130 9 4 500 24000 380 220
DJ-23/140 23000 140 9 4 500 24000 380 220
DJ-25/150 25000 150 9 4 500 24000 380 220
DJ-28/170 28000 170 9 4 500 24000 380 220
DJ-30/190 30000 190 9 4 600 44000 380 220
DJ-35/210 35000 210 9 4 600 44000 380 220
DJ-41/250 41000 250 9 5 630 45000 380 220
DJ-50/300 50000 300 9 5 630 45000 380 220
US $850-2,600
/ Piece
|
1 Piece

(Min. Order)

###

After-sales Service: Yes
Warranty: 1 Year
Certification: CE, ISO
Color: White
Shipping Port: Guangzhou/Foshan/Shenzhen
Lead Time: 15 Days

###

Samples:
US$ 2980/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DL-2.0/10 2000 10 4.5 1 300 1700 380 220
DL-3.0/15 3000 15 4.5 2 300 3400 380 220
DL-5.0/25 5000 25 4.5 3 400 5100 380 220
DL-8.0/40 8000 40 4.5 2 400 8000 380 220
DL-11.2/55 11200 55 4.5 2 500 8000 380 220
DL-16.2/80 16200 80 4.5 2 500 12000 380 220
DL-21.0/105 21000 105 4.5 2 500 12000 380 220
DL-25.0/135 25000 135 4.5 3 500 18000 380 220
DL-32.6/160 32600 160 4.5 3 500 18000 380 220
DL-37.6/185 37600 185 4.5 3 500 18000 380 220
DL-42.7/220 42700 220 4.5 4 500 24000 380 220
DL-50.0/250 50000 250 4.5 4 500 24000 380 220
DL-55.0/280 55000 280 4.5 4 500 24000 380 220
DL-60.0/300 60000 300 4.5 4 500 24000 380 220
DL-66.0/330 66000 330 4.5 4 500 24000 380 220
DL-70.0/375 70000 375 4.5 4 600 44000 380 220
DL-82.0/410 82000 410 4.5 4 600 44000 380 220
DL-94.0/470 94000 470 4.5 5 630 45000 380 220
DL-116.0/580 11600 580 4.5 5 630 45000 380 220

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DD-1.3/7 1300 7 6 1 300 1700 380 220
DD-2.2/12 2200 12 6 2 300 3400 380 220
DD-2.8/15 2800 15 6 2 300 3400 380 220
DD-3.7/22 3700 22 6 3 300 5100 380 220
DD-5.6/30 5600 30 6 2 400 8000 380 220
DD-7.5/40 7500 40 6 2 400 8000 380 220
DD-11.2/60 11200 60 6 2 500 12000 380 220
DD-14.9/80 14900 80 6 2 500 12000 380 220
DD-18.7/100 18700 100 6 3 500 18000 380 220
DD-22.4/120 22400 120 6 3 500 18000 380 220
DD-26.4/140 26400 140 6 3 500 18000 380 220
DD-30.0/160 30000 160 6 4 500 24000 380 220
DD-35.0/180 35000 180 6 4 500 24000 380 220
DD-37.0/200 37000 200 6 4 500 24000 380 220
DD-40.0/220 40000 220 6 4 500 24000 380 220
DD-46.0/250 46000 250 6 4 500 24000 380 220
DD-50.0/275 50000 275 6 4 600 44000 380 220
DD-57.0/310 57000 310 6 5 600 44000 380 220
DD-67.0/360 67000 360 6 5 630 45000 380 220
DD-81.0/440 81000 440 6 5 630 45000 380 220

###

Model Capacity
(W)
Cooling surface
(m2)
Fin Space
(mm)
Fan HeaterVoltage
(v)
Qty Size
(mm)
Air flow
(m3/h)
Voltage
(v)
DJ-1.2/8 1200 8 9 2 300 3400 380 220
DJ-2.1/15 2100 15 9 3 300 5100 380 220
DJ-3.6/20 3600 20 9 2 400 8000 380 220
DJ-4.6/30 4600 30 9 2 400 8000 380 220
DJ-7.1/40 7100 40 9 2 500 12000 380 220
DJ-8.9/55 8900 55 9 2 500 12000 380 220
DJ-11.6/70 11600 70 9 3 500 18000 380 220
DJ-14.3/85 14300 85 9 3 500 18000 380 220
DJ-17.1/100 17100 100 9 3 500 18000 380 220
DJ-19.6/115 19600 115 9 4 500 24000 380 220
DJ-22/130 22000 130 9 4 500 24000 380 220
DJ-23/140 23000 140 9 4 500 24000 380 220
DJ-25/150 25000 150 9 4 500 24000 380 220
DJ-28/170 28000 170 9 4 500 24000 380 220
DJ-30/190 30000 190 9 4 600 44000 380 220
DJ-35/210 35000 210 9 4 600 44000 380 220
DJ-41/250 41000 250 9 5 630 45000 380 220
DJ-50/300 50000 300 9 5 630 45000 380 220

A Buyer’s Guide to Air Compressor Types

There are many types of Air Compressors, and it’s important to understand what each type has to offer. In this article, we’ll discuss single stage air compressors, low-noise compressors, and models with two pistons. But, before you buy an Air Compressor, be sure to read our buyer’s guide to the various types. This way, you’ll have all of the information you need to make the right decision for your business.
air-compressor

Single-stage air compressors

A single-stage air compressor is an excellent choice for most general-purpose purposes. They provide enough power to operate pneumatic tools, and they produce less heat. Single-stage air compressors, however, are not suitable for heavy-duty industrial uses. However, they can be used in various applications, including auto shops, gas stations, and various manufacturing facilities. They are also suitable for borewells and other high-pressure places.
These air compressors are a great choice for home use and are suitable for small-scale businesses, contractors, and small shops. These compressors have continuous duty cycles, cast iron compressor pumps, and a minimum 5,000-hour pump life. They also feature advanced features, including ODP motors, Auto Start & Controls, Receiver tanks, and power cords. They have low maintenance and can save you a great deal of money.
Single-stage air compressors are generally less expensive and lighter than their two-stage counterparts. Single-stage air compressors are also more portable, which is a plus for small projects. While two-stage compressors offer higher CFM, they are more powerful and bulky, making them unsuitable for small or home use. So it is essential to determine what you will use the air compressor for and decide on a model based on your needs.
A single-stage air compressor is made of a piston and a tank. The piston moves rapidly inside the cylinder and exerts pressure on the cylinder. This means that the piston can’t move any faster than the air pressure outside the cylinder. The piston is designed to operate in the same way for each stage. This is a great choice for home shops and one-man automotive shops, as it allows you to control the pressure without sacrificing the pump’s life.
Single-stage air compressors are often cheaper than two-stage versions, but they are not the best choice for every application. If you are only using your air compressor occasionally, you’ll find a one-stage model to be much more reliable than a two-stage model. The main difference between the two types of compressors is in the amount of air that each stage compresses. A two-stage air compressor will have more air storage capacity, but it will still produce more pressure.

Rotary vane compressors

Rotary vane compressors use a centrifugal pump to compress air. The rotor is set eccentrically in the housing, which almost touches the vane. As the rotor turns, the air that enters the pump is trapped between the vanes. This compressed air undergoes compression as the rotor rotates. Vanes are small pieces of carbon fiber or graphite composite. Vanes may be made of different materials depending on the application.
While rotary vane pumps are not commonly used to produce compressed air, they are widely used in automotive and hydraulic applications. Chances are, you have used a rotary vane pump at some point in your life. These pumps are also common in the vacuum and compressed air industries. As a result, many people don’t realize that they’re still around. They feature slots that allow the vanes to slide in and out of the rotor.
A rotary vane compressor has a drum and rotor inside. The rotor is eccentrically positioned and has slots and grooves on its surface. Its inlet and outlet ports are situated off-center, allowing the vanes to be pushed out by centrifugal force. Because the rotor rotates so quickly, air is trapped between the vanes. This air then becomes pressurized by the rotating rotor.
Rotating vane compressors can be easily serviced and repaired. A simple replacement of carbon vanes requires just 15 minutes and common tools. The carbon vanes typically last nine to eighteen months, depending on system operating pressure. Before purchasing a rotary vane compressor, make sure to check whether it has been properly performance-tested and has a warranty. Generally, warranties cover the rotor/stator chambers but do not cover the vanes or air filters. You should also check if the unit is covered by a lightning or water damage warranty.
Rotary vane compressors are an integral part of manufacturing industries. Many pharmaceutical manufacturing facilities depend on rotary vane compressors to control their equipment. Other industries that use rotary vane compressors include the plastics, woodworking, natural gas, and medical & dental fields. Their benefits are numerous and far outweigh any disadvantages of rotary screw compressors. For example, a rotary vane compressor can double the life of a conventional compressor.
air-compressor

Rotary vane compressors with low-noise models

If you are looking for a rotary vane air compressor, you have come to the right place. CZPT’s LV Series rotary vane compressors offer low-noise models, compact size, and robust integration. In addition to their low-noise features, they feature large filter systems to deliver high-quality compressed air. The LV Series models also feature CZPT’s reputation for reliability and quality.
This type of compressor uses centrifugal force to operate and is limited in its top and minimum operating speeds. They are only a third as powerful as screw compressors, and their top speed limits are much lower. Furthermore, the vanes wear out easily at high speeds because there is not enough centrifugal force to seal them against the cylinder’s edges. Even at half their full capacity, they consume as much as 80% of their total energy rating.
Because piston compressors produce a lot of noise, factory owners and shop owners have begun to install noise-dampening cabinets and other solutions. But, rotary vane compressors produce far less noise than a traditional vacuum, and the maintenance costs are also low. Rotary vane compressors are also extremely helpful in several industries. They are used in the automotive and auto finishing industries, as well as in dairy industries and milking machines.
If you have a deep pond, a rotary vane air compressor kit can pump up to 20 feet of water. This is more than enough airflow for two to five diffusers. A 1/4 HP rotary vane kit pumps around 4.2 CFM. It also helps to increase circulation and oxygen levels in the pond. Finally, a 1/4 HP kit offers the necessary power to clean up the bottom of a pond.
The rotary vane and rotary screw are the most popular air compressors today. While they are similar in many ways, they are more versatile and durable than their counterparts. They use fewer angular contact ball bearings and require less frequent maintenance than piston air compressors. Compared to piston air compressors, rotary vane and rotary screw compressors are quieter and are less expensive.
air-compressor

Rotary vane compressors with two pistons

The rotary vane and rotary screw compressors are similar in application, but both have different advantages and disadvantages. This article will compare the benefits of each and highlight the differences between them. While both are commonly used in industrial applications, rotary vane compressors are preferred by many industries. These compressors also have a wide range of uses, ranging from automotive air tool operation to milking machines. These compressors also have the advantage of being quieter than piston-powered ones.
The current common rail position may not be suitable for pressure swirl injectors, but new positions have been tested and show improvements in specific energy values. Moreover, the current position is not required for external oil pumps. However, mass induction and expulsion have to be performed with utmost care. This article focuses on the design and efficiency of rotary vane compressors. You can find more information about this new design in the references mentioned below.
The advantages of this type of compressor are its low cost, compact size, and easy maintenance. Hence, they are preferred in low capacity applications. Moreover, they feature integrated vanes. The rotating vanes close the air gap and compress air towards the outlet. Compared to piston-powered compressors, these units are cheaper and more reliable. Therefore, you should choose one with the lowest price tag. You can also opt for rotary vane compressors that are oil-free.
Sliding vane compressors are another popular variant. They have a single cylinder connected to the compressor and are capable of operating at low speeds. This design also reduces the amount of friction and maintains volumetric efficiency. However, the sliding vane compressors suffer from high frictional losses. If you are looking for a more efficient rotary compressor, this is the best option. While sliding vane compressors have been in the spotlight for over a century, they are still quite young.
These compressors are easy to install and maintain. They are also quieter than piston compressors. They are also cheaper than piston-driven compressors. The energy efficiency and low price make them the perfect choice for any commercial or industrial application. If you’re looking for a small, compact compressor, the rotary vane has been proven to be the best choice for your needs. You should know that it has a long service life.

China Freezing Equipment Cold Room Indoor Unit DJ Evaporator Coil Condenser Refrigerator Air Cooler Evaporator and Compressor     wholesaler China Freezing Equipment Cold Room Indoor Unit DJ Evaporator Coil Condenser Refrigerator Air Cooler Evaporator and Compressor     wholesaler
editor by czh 2022-12-07

Recent Posts