China Good quality Primary Singel Stage Pressure AC Power Permanent Magnet Frequency Conversion Oil Lubricated Rotary Screw Air Compressor with Best Sales

Merchandise Description

Solution Description

Far more productive, energy-preserving, and ecologically pleasant
Runningway uses progressive processing equipment from close to the planet to assure solution balance and dependability.
To manufacture higher-top quality goods, we use top-of-the-line generation products, screening tools, and reducing-edge technological innovation.
Each step in the R&D and manufacturing chain is continuously innovating, resulting in the start of substantial-good quality air compressors.

Performance Saving Vitality Air End Screw
The air finish features a massive rotor with a lower pace and 2 impartial compression models.
Higher efficiency and dependability Minimal vibration and minimal noise. Per stage, there is a reduced compression ratio. Volumetric efficiency is improved. Leakage is decreased. The shaft bears considerably less power and has a for a longer time daily life considering that the same power is used by 2 heads to bear the load.
The air end has a large rotor that rotates little by little and comprises 2 different compression units. It has a higher efficiency, lower sound, lower vibration, and large trustworthiness, as properly as a reduced compression ratio in each stage, lowered leakage, and a greater volume effectiveness. Two units get the load under the same energy, minimizing the tension on every bearing and extending the daily life of the element.

Permanent magnet motors that conserve energy
The principal motors are strength efficient IP54 rated long lasting magnet motors that have been very carefully selected to meet the requirements of the air compressor software, all of which fulfill national level power performance specifications, torque, and load to meet up with certain design standards in purchase to optimize motor effectiveness and electrical power factor beneath load problems. Other motor efficiencies are about 5-8 per cent much better than this the best possible element.

Oil separation system with high performance and reduced vitality consumption
Oil filter, reduced force drop layout, support life of up to 4000 hours, large filtration precision to properly safeguard the bearings and screw equipment rotor, high effectiveness oil and gas separator, special simplified style, aggregated separation core and the composition of the oil return unit, service existence of 6000 hrs, oil filter, lower strain fall style, support daily life of up to 4000 several hours, large filtration precision to properly shield the bearings and screw device rotor Air filter, no need to have to alter air circulation course when filtering, air flows directly by means of the filter media, reducing pressure reduction, more strength successful than common air filters, more substantial filter location, greater precision, longer life.

The cooling technique is well-made.
Adopt a substantial performance warp sort huge region warmth exchange cooler with a thirty% warmth exchange surplus for increased cooling influence and the capability to perform generally in temperatures as minimal as 45°C.

The cooling program is well-developed.
Adopt a substantial efficiency warp kind big spot heat trade cooler with a 30% heat exchange surplus for higher cooling result and the capability to function generally in temperatures as minimal as 45°C.

Control system for clever microcomputers
Basic operation, Chinese/English, standard Chinese switching, air filter/oil filter/oil air separator/lubricant, smart checking and administration of use time, and a variety of distant monitoring features for consumers to decide on from.

Single-stage compressor with permanent magnets
The new strength-preserving arrangement makes use of 20% considerably less energy than standard industrial frequency machines.
Converter of frequencies
A frequency-controlled transmission method is developed by using a common-function frequency converter, which saves strength, lowers production charges, will increase employee efficiency, and increases product high quality.

Due to the fact the inverter screw compressor can make use of the inverter’s stepless pace manage attribute, it can accomplish rapid strain adjustment and handle, and air strain balance is enhanced exponentially due to the fact the inverter adjusts the motor pace in actual time dependent on real air intake, it can also let the compressor sleep instantly when the air usage is lower, which will save power.Simply because the procedure frequency is reduce than the operating frequency in the course of regular procedure, mechanical sound is reduced and mechanical put on and tear is minimal the air storage tank’s capability is minimal.
 

Item Parameters

Model Pressure Capacity Power Outlet Pipe Diameter Noise Dimension Weight
bar(g) psig m3/min cfm kw hp mm dB(A) L(mm) W(mm) H(mm) kg
RHP7.5-7A 7 101 1.2 42.38 7.5 10.05 Rp1/2 66 900 700 900 180
RHP7.5-8A 8 116 1.1 38.85
RHP7.5-10A 10 145 1 35.31
RHP11-7A 7 101 1.7 60.03 11 14.75 Rp3/4 66 1100 750 1000 250
RHP11-8A 8 116 1.5 52.97
RHP11-10A 10 145 1.3 45.91
RHP15-7A 7 101 2.5 88.29 15 20.11 Rp3/4 66 1100 750 1000 260
RHP15-8A 8 116 2.3 81.22
RHP15-10A 10 145 2.1 74.16
RHP22-7A 7 101 3.7 130.66 22 29.49 Rp1 68 1100 850 1200 350
RHP22-8A 8 116 3.6 127.13
RHP22-10A 10 145 3.4 120.07
RHP30-7A 7 101 5.3 187.17 30 40.21 R1.1/2 72 1200 1000 1400 500
RHP30-8A 8 116 5.0  176.57
RHP30-10A 10 145 4.5 158.92
RHP37-7A 7 101 6.6 233.08 37 49.60  R1.1/2 72 1200 1000 1400 520
RHP37-8A 8 116 6.3 222.48
RHP37-10A 10 145 5.3 187.17
RHP45-7A 7 101 8.2 289.58 45 60.32 R1.1/2 72 1500 1000 1350 590
RHP45-8A 8 116 7.5 264.86
RHP45-10A 10 145 6.8 240.14
RHP55-7A 7 101 10.7 377.87 55 73.73 Rp2 78 1800 1250 1700 1680
RHP55-8A 8 116 9.7 342.55
RHP55-10A 10 145 9.2 324.89
RHP75-7A 7 101 14.1 497.94 75 100.54 Rp2 78 1800 1250 1700 1800
RHP75-8A 8 116 13.1 462.62
RHP75-10A 10 145 11.7 413.18
RHP90-7A 7 101 16.6 586.22 90 120.64 Rp2 83 2000 1250 1700 1860
RHP90-8A 8 116 15.7 554.44
RHP90-10A 10 145 13.7 483.81
RHP110-7A 7 101 22.0  776.92 110 147.45 Rp2.1/2 85 2300 1500 1850 2600
RHP110-8A 8 116 21.5 759.27
RHP110-10A 10 145 18.2 642.73
RHP132-7A 7 101 25.0  882.87 132 176.94 Rp2.1/2 85 2300 1500 1850 2800
RHP132-8A 8 116 24.2 854.61
RHP132-10A 10 145 22.1 780.45
Model Pressure Capacity Power Outlet Pipe Diameter Noise Dimension Weight
bar(g) psig m3/min cfm kw hp mm dB(A) L(mm) W(mm) H(mm) kg
RHP7.5-7A 7 101 1.2 42.38 7.5 10.05 Rp1/2 66 900 700 900 180
RHP7.5-8A 8 116 1.1 38.85
RHP7.5-10A 10 145 1 35.31
RHP11-7A 7 101 1.7 60.03 11 14.75 Rp3/4 66 1100 750 1000 250
RHP11-8A 8 116 1.5 52.97
RHP11-10A 10 145 1.3 45.91
RHP15-7A 7 101 2.5 88.29 15 20.11 Rp3/4 66 1100 750 1000 260
RHP15-8A 8 116 2.3 81.22
RHP15-10A 10 145 2.1 74.16
RHP22-7A 7 101 3.7 130.66 22 29.49 Rp1 68 1100 850 1200 350
RHP22-8A 8 116 3.6 127.13
RHP22-10A 10 145 3.4 120.07
RHP30-7A 7 101 5.3 187.17 30 40.21 R1.1/2 72 1200 1000 1400 500
RHP30-8A 8 116 5.0  176.57
RHP30-10A 10 145 4.5 158.92
RHP37-7A 7 101 6.6 233.08 37 49.60  R1.1/2 72 1200 1000 1400 520
RHP37-8A 8 116 6.3 222.48
RHP37-10A 10 145 5.3 187.17
RHP45-7A 7 101 8.2 289.58 45 60.32 R1.1/2 72 1500 1000 1350 590
RHP45-8A 8 116 7.5 264.86
RHP45-10A 10 145 6.8 240.14
RHP55-7A 7 101 10.7 377.87 55 73.73 Rp2 78 1800 1250 1700 1680
RHP55-8A 8 116 9.7 342.55
RHP55-10A 10 145 9.2 324.89
RHP75-7A 7 101 14.1 497.94 75 100.54 Rp2 78 1800 1250 1700 1800
RHP75-8A 8 116 13.1 462.62
RHP75-10A 10 145 11.7 413.18
RHP90-7A 7 101 16.6 586.22 90 120.64 Rp2 83 2000 1250 1700 1860
RHP90-8A 8 116 15.7 554.44
RHP90-10A 10 145 13.7 483.81
RHP110-7A 7 101 22.0  776.92 110 147.45 Rp2.1/2 85 2300 1500 1850 2600
RHP110-8A 8 116 21.5 759.27
RHP110-10A 10 145 18.2 642.73
RHP132-7A 7 101 25.0  882.87 132 176.94 Rp2.1/2 85 2300 1500 1850 2800
RHP132-8A 8 116 24.2 854.61
RHP132-10A 10 145 22.1 780.45

How to Choose the Right Air Compressor

An air compressor uses pressurized air to power a variety of tools. They are most commonly used to power nailers and impact wrenches. Other popular uses for air compressors include paint sprayers and impact wrenches. While all air compressors have the same basic construction, their specialty differs. Ultimately, their differences come down to the amount of air they can push. Read on for information on each type of air compressor. These tools are great for many different purposes, and choosing the right air compressor depends on your specific needs.
air-compressor

Electric motor

While purchasing an electric motor for air compressor, compatibility is a key factor. Not all motors work with the same type of air compressor, so it’s important to check the manufacturer’s instructions before purchasing. By doing this, you can avoid wasting money on an incompatible motor. Another important consideration is speed. A motor’s speed is its rate of rotation, measured in revolutions per minute. It is critical that you purchase a motor with sufficient speed to meet the needs of your air compressor.
Typically, an electric motor for air compressor is 1.5 hp. It is ideal for use with medical equipment and metal-cutting machines. It also performs well under continuous operation and offers a high efficiency and energy-saving performance. Moreover, it features an attractive price, making it a good choice for a wide range of applications. If you are looking for a motor for an air compressor, look no further than a ZYS series.
A motor’s protection class indicates how the motor will operate. Protection classes are specified by the IEC 60034-5. These are stated with two digits and represent the protection against solid objects and water. For example, an IP23 rating means that the motor will be protected from solid objects, while IP54 means that it will protect from dust and water sprayed from all directions. It is vital to choose a motor with the correct protection class for your air compressor.
When choosing an electric motor, you should consider whether it’s compatible with the brand of air compressor. Some may be compatible, while others may require advanced electronics skills to repair. However, most air compressors are covered by warranty, so it’s important to check with the manufacturer if the warranty is still in effect before you spend a dime on a replacement. The motor should be replaced if it has failed to perform as designed.
air-compressor

Oil bath

Air compressors require proper lubrication to function efficiently. The piston must draw air with minimal friction. Depending on their design, air compressors can either be oil-lubricated or oil-free. The former uses oil to reduce piston friction, while the latter splashes it on the cylinder bearings and walls. Such air compressors are commonly known as oil-flooded air compressors. In order to keep their oil baths clean, they are recommended for use in locations with high dust levels.

Start/stop control

An air compressor can be controlled by a start/stop control. This type of control sends a signal to the main motor that activates the compressor when the demand for air falls below a preset limit. This control strategy is effective for smaller air compressors and can be useful for reducing energy costs. Start/stop control is most effective in applications where air pressure does not change frequently and where the compressor is not required to run continuously.
To troubleshoot this problem, you need to check the power supply of your compressor. To check the supply side, use a voltage monitor to determine if power is flowing to the compressor. Ensure that the power supply to the compressor is steady and stable at all times. If it fluctuates, the compressor may not start or stop as expected. If you cannot find the problem with the air compressor power supply, it may be time to replace it.
In addition to the start/stop control, you may want to purchase additional air receivers for your air compressor. These can increase the capacity of air stored and reduce the number of times it starts and stops. Another way to decrease the number of starts per hour is to add more air receivers. Then, you can adjust the control to match your requirements. You can also install a pressure gauge that monitors the compressor’s performance.
Start/stop control for air compressors can be complex, but the basic components are relatively easy to understand. One way to test them is to turn the compressor on or off. It is usually located on the exterior of the motor. If you’re unsure of the location of these components, check the capacitors and make sure that the air compressor is not running while you’re not using it. If it does, try to remove the capacitor.
Variable displacement control is another way to adjust the amount of air flowing into the compressor. By controlling the amount of air, the control can delay the use of additional compressors until more required air is available. In addition to this, the device can also monitor the energy used in the compressor. This control method can result in substantial energy savings. You can even save on the amount of electricity by using variable displacement control. It is essential for efficient compressed air systems.
air-compressor

Variable speed drive

A VFD, or variable frequency drive, is a type of electric motor that adjusts its speed to match the demand for air. It is an efficient way to reduce energy costs and improve system reliability. In fact, studies have shown that a 20% reduction in motor speed can save up to 50% of energy. In addition, a VFD can monitor additional variables such as compressor oil pressure and motor temperature. By eliminating manual checks, a VFD will improve the performance of the application and reduce operating costs.
In addition to reducing energy costs, variable-speed drives also increase productivity. A variable-speed air compressor reduces the risk of system leaks by 30 percent. It also reduces the risk of system leaks by reducing pressure in the system. Because of these advantages, many governments are promoting this technology in their industries. Many even offer incentives to help companies upgrade to variable-speed drives. Therefore, the variable-speed drive can benefit many air compressor installations.
One major benefit of a variable-speed drive is its ability to optimize energy use. Variable frequency drives are able to ramp up and down to match the demand for air. The goal is to optimize the pressure and flow in the system so that the best “dead band” occurs between forty percent and eighty percent of full load. A variable-speed compressor will also increase energy efficiency because of its programmability.
A variable-speed air compressor can also be used to control the amount of air that is compressed by the system. This feature adjusts the frequency of power supplied to the motor based on the demand. If the demand for air is low, the frequency of the motor will reduce to save energy. On the other hand, if there is an excess demand for air, the variable-speed compressor will increase its speed. In addition, this type of air compressor is more efficient than its fixed-speed counterpart.
A VFD has many benefits for compressed air systems. First, it helps stabilize the pressure in the pipe network, thereby reducing the power losses due to upstream pressure. It also helps reduce the power consumption caused by fluctuations in upward pressure. Its benefits are also far-reaching. And as long as the air pressure and air supply is properly sized, a VFD will help optimize the efficiency of compressed air systems.

Recent Posts