China Professional 2.2 Kw 3 HP Small Silent 8 Bar 10 Bar 12 Bar Oilless Direct Drive Pm VSD Oil Free Scroll Type Air Compressor for Dental/Laboratory/E-Mobility Bus/Food/Medical 12v air compressor

Product Description

8~12bar DIRECT-DRIVE OIL-FREE SCROLL AIR COMPRESSOR (PM VSD)
 

Precision air end(2 years warranty)
High precision, stiffness, and durable square air-end ensure max pressure 12bar.
IP67 protection level, F insulation level, Efficiency is improved 10%

PM motor & Variable frequency inverter
VSD soft no current impact. Inverter adjusts motor speed automatically, saving energy and long service life.

Direct drive
The motor is connected with the air-end directly, without THE belt, coupling, no need for adjustment, super low noise

Individual cooling fan
Low discharge compressed air temperature after cooled by an individual fan to ensure the low-pressure dew point.

Purity stainless steel air tank
Stainless Steel pipe and connection

Super quiet
Smart structure and advanced soundproof casing to reduce the noise to 49dB(A)

Intelligent PLC controller
Display operation situation of air-end
Remind maintenance timely

Product Parameters

 

Product Description

 

1. The orbiting scroll and fixed scroll housing are mated to create the compression chambers.
2. The continual movement of the orbiting scroll moves atmospheric air from the intake toward to the center, compressing the air into progressively smaller areas.
3. The continual movement of the orbiting scroll moves atmospheric air from the intake toward to the center, compressing the air into progressively smaller areas.
 

 

Hot Sale Products

 

 

 

           2~10bar Oil-injected                        7~16bar All-in-1                       Small Single-phase
       Screw Air Compressor                   Screw Air Compressor                 Screw Air Compressor  

 

         2~40bar 100% Oil-free                   8~12bar 100% Oil-free                Diesel Engine Portable
       Screw Air Compressor                   Scroll Air Compressor                 Screw Air Compressor  

 

 

Main Product

 

What we can supply:

* Oil-injected Screw Air Compressor (2~16 bar)
* All-in-1 Screw Air Compressor with Tank, Dryer, and Filters (7~16 bar)
* Single-phase Small Screw Air Compressor for Home use (8~10 bar)
* Water-injected Oil-free Screw Air Compressor (2~40 bar)
* Oil-free Scroll Air Compressor (8~12 bar)
* Diesel&Electric Engine Portable Screw Air Compressor (8~30 bar)
* Air Dryer, Air tank, Filters, and other Spare parts

After-sales Service: 24*7 Online Services and Video Guide
Warranty: 1 Year for The Whole Machine & 2 Years for Air End
Installation Type: Stationary Type
Lubrication Style: Oil-free
Noise: 49 dB(a)
Air Tank: Stainless Steel Material
Customization:
Available

|

air compressor

What Maintenance Is Required for Oil-Free Air Compressors?

Maintaining oil-free air compressors is crucial to ensure their optimal performance, reliability, and longevity. While oil-free compressors have lower maintenance requirements compared to oil-lubricated compressors, regular maintenance tasks are still necessary. Here’s a detailed explanation of the maintenance required for oil-free air compressors:

1. Regular Filter Replacements:

Oil-free air compressors have filters that help remove contaminants from the intake air. These filters should be regularly inspected and replaced as recommended by the manufacturer. Filters can become clogged over time, affecting the compressor’s efficiency and potentially increasing the risk of contaminants entering the compressed air stream. Regular filter replacements ensure proper air filtration and help maintain the desired level of air purity.

2. Condensate Drainage:

Oil-free compressors produce condensate, which is a mixture of water and oil-free compressed air. Proper condensate drainage is essential to prevent water buildup in the system, which can lead to corrosion and damage. Most oil-free compressors have automatic condensate drains that remove accumulated condensate. It’s important to regularly check and maintain these drains to ensure they are functioning correctly and prevent any blockages or leaks.

3. Inspection of Air Hoses and Connections:

Regularly inspecting air hoses, fittings, and connections is important to identify any leaks or damage. Leaks can lead to air pressure loss, reduced compressor efficiency, and increased energy consumption. Damaged hoses or connections should be repaired or replaced promptly to maintain the integrity of the compressed air system. Regular inspections can help identify potential issues early on and prevent costly breakdowns or inefficiencies.

4. Monitoring Air Pressure and Temperature:

Monitoring the air pressure and temperature of the compressor system is crucial for identifying any abnormalities or deviations from the desired operating parameters. Most oil-free compressors have built-in pressure and temperature sensors that provide real-time data. Regularly checking and recording this data can help detect any potential issues, such as pressure drops, abnormal temperature increases, or excessive cycling. If any abnormalities are detected, they should be investigated and addressed promptly to prevent further damage to the compressor.

5. General System Checks:

Performing general system checks on a regular basis helps ensure that all components of the oil-free air compressor are functioning properly. This includes inspecting the compressor motor, cooling fans, belts, and electrical connections. Any signs of wear, damage, or abnormal noise should be addressed promptly. Additionally, checking the compressor for any signs of oil contamination or unusual odors can help identify potential issues with the compressor system.

6. Manufacturer’s Recommendations:

It’s essential to follow the manufacturer’s recommended maintenance schedule and guidelines for the specific oil-free air compressor model. The manufacturer’s recommendations may include additional maintenance tasks specific to the compressor’s design and components. Adhering to these guidelines ensures that the compressor is properly maintained and can help prevent warranty issues.

Regular and proactive maintenance of oil-free air compressors is essential to ensure their reliable and efficient operation. Following the recommended maintenance tasks, monitoring system parameters, and promptly addressing any issues that arise can help extend the compressor’s lifespan, reduce the risk of breakdowns, and maintain the desired air quality for the intended applications.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

How Do Oil-Free Air Compressors Compare to Oil-Lubricated Ones?

When comparing oil-free air compressors to oil-lubricated ones, several factors come into play, including performance, maintenance requirements, air quality, and application suitability. Here’s a detailed comparison between oil-free air compressors and oil-lubricated ones:

1. Oil Contamination:

Oil-lubricated compressors require oil for lubrication and cooling of internal components. However, there is a risk of oil carryover, where small amounts of oil can mix with the compressed air. This oil contamination can have adverse effects on downstream equipment, processes, and end products. In contrast, oil-free air compressors eliminate the risk of oil contamination as they operate without lubricating oil. This makes them suitable for applications that require clean and oil-free compressed air, such as in the food and beverage, pharmaceutical, and electronics industries.

2. Compressed Air Quality:

Oil-lubricated compressors may introduce oil aerosols, vapors, or particles into the compressed air stream. While filters and separators can help mitigate oil contamination, achieving completely oil-free compressed air may be challenging. In contrast, oil-free air compressors deliver clean and dry compressed air without any oil content. They are designed to meet strict air quality standards, such as ISO 8573-1 Class 0, ensuring the highest level of air purity. This makes them ideal for applications where air quality is critical, such as in pharmaceutical manufacturing, research laboratories, and electronics assembly.

3. Maintenance Requirements:

Oil-lubricated compressors require regular maintenance to ensure proper lubrication, filter replacement, and oil changes. The presence of oil also necessitates careful monitoring of oil levels and potential leaks. Maintenance tasks can be more involved and time-consuming compared to oil-free compressors. On the other hand, oil-free air compressors generally have lower maintenance requirements since they don’t require oil changes or oil-related maintenance. However, regular maintenance tasks such as filter replacements and general system checks are still necessary to maintain optimal performance and reliability.

4. Initial Cost and Energy Efficiency:

Oil-lubricated compressors typically have a lower initial cost compared to oil-free compressors. However, oil-free compressors can offer long-term cost savings due to reduced maintenance requirements and lower energy consumption. Oil-lubricated compressors use oil for lubrication, which adds to the energy consumption as the compressor needs to overcome the friction generated by the oil. In contrast, oil-free compressors eliminate the need for oil, resulting in higher energy efficiency and potential energy savings over the compressor’s lifespan.

5. Application Suitability:

The choice between oil-free and oil-lubricated compressors depends on the specific application requirements. Oil-lubricated compressors are often suitable for general industrial applications where compressed air quality is not critical, and oil carryover is acceptable. They are commonly used in manufacturing, construction, and automotive industries. On the other hand, oil-free compressors are essential for applications that demand clean and oil-free compressed air, such as in food processing, pharmaceutical production, electronics manufacturing, and critical research environments.

It’s important to consider the specific needs of the application, industry regulations, and the desired level of compressed air purity when choosing between oil-free and oil-lubricated compressors. Consulting with compressed air experts and considering factors such as air quality requirements, maintenance costs, and long-term energy efficiency can help determine the most suitable compressor type for a particular application.

China Professional 2.2 Kw 3 HP Small Silent 8 Bar 10 Bar 12 Bar Oilless Direct Drive Pm VSD Oil Free Scroll Type Air Compressor for Dental/Laboratory/E-Mobility Bus/Food/Medical   12v air compressorChina Professional 2.2 Kw 3 HP Small Silent 8 Bar 10 Bar 12 Bar Oilless Direct Drive Pm VSD Oil Free Scroll Type Air Compressor for Dental/Laboratory/E-Mobility Bus/Food/Medical   12v air compressor
editor by CX 2023-09-28

Recent Posts