China Professional Oil Free N2 Methane Gas Air Compressor for Sale lowes air compressor

Product Description

                       Reciprocating Micro-oil/ oil-free Piston Compressor
                                     ( Blue Font To View Hyperlink)

Our company specialize in making various kinds of compressors, such as:Diaphragm compressor,Piston compressor, Air compressors,Nitrogen generator,Oxygen generator ,Gas cylinder,etc. All products can be customized according to your parameters and other requirements.

This series of oil-free compressor is one of the first products produced by our factory in China. The product has the characteristics of low speed, high component strength, stable operation, long service life and convenient maintenance. This series compressor is in the form of unit. It integrates compressor, gas-liquid separator, filter, 2 position four-way valve, safety valve, check valve, explosion-proof motor and chassis. The utility model has the advantages of small volume, light weight, low noise, good sealing performance, easy installation, simple operation, etc.

Main components
1.  Motion system: crankshaft, piston connecting rod assembly, coupling, etc.
2.  Air distribution system: valve plate, valve spring, etc.
3. Sealing system: piston ring, oil seal, gasket, packing, etc.

4. Body system: crankcase, cylinder block, cylinder liner, cover plate, etc.
5. Lubrication system: lubricating oil pump, oil filter, pressure regulating valve, etc.;
6Safety and energy regulation systems: safety valves, energy regulation devices, etc.

Working principle of piston compressor
When the crankshaft of the piston compressor rotates, the piston will reciprocate through the transmission of the connecting rod, and the working volume formed by the inner wall of the cylinder, the cylinder head and the top surface of the piston will periodically change. When the piston of a piston compressor starts to move from the cylinder head, the working volume in the cylinder gradually increases. At this time, the gas flows along the intake pipe and pushes the intake valve to enter the cylinder until the working volume reaches the maximum. , The intake valve is closed; when the piston of the piston compressor moves in the reverse direction, the working volume in the cylinder is reduced, and the gas pressure is increased. When the pressure in the cylinder reaches and is slightly higher than the exhaust pressure, the exhaust valve opens and the gas is discharged from the cylinder , Until the piston moves to the limit position, the exhaust valve is closed. When the piston of the piston compressor moves in the reverse direction again, the above process repeats. In short, the crankshaft of a piston compressor rotates once, the piston reciprocates once, and the process of air intake, compression, and exhaust is realized in the cylinder, which completes a work cycle.

Advantages of piston compressor
1. The applicable pressure range of the piston compressor is wide, and the required pressure can be reached regardless of the flow rate;
2. The piston compressor has high thermal efficiency and low unit power consumption;
3. Strong adaptability, that is, a wide exhaust range, and is not affected by the pressure level, and can adapt to a wider pressure range and cooling capacity requirements;
4. Piston compressors have low requirements for materials, and use common steel materials, which is easier to process and lower in cost;
5. The piston compressor is relatively mature in technology, and has accumulated rich experience in production and use;
6. The device system of the piston compressor is relatively simple.

Note: In the unloading process, the compressor pressurizes the gas from the storage tank and then presses it into the tank car through the gas-phase pipeline, and presses the liquid from the tank car to the storage tank through the gas-phase differential pressure to complete the unloading process. When the gas phase is pressurized, the temperature of the gas phase will rise. At this time, forced cooling is not necessary, because if the gas phase is compressed and then cooled, it is easy to liquefy, and it is difficult to establish the pressure difference of the gas phase, which is not conducive to the replacement of the gas phase and the liquid phase. In short, it will cause the prolongation of the unloading process. If it is necessary to recover the residual gas, the cooler can be selected to forcibly cool the gas phase during the recovery operation, so as to recover the residual gas as soon as possible.The loading process is opposite to the unloading process.

Chemical Process Compressor Description 
Chemical process compressors refer to process reciprocating piston compressors used to compress various single or mixed media gases in petroleum and chemical processes, as well as chemical exhaust gas recycling systems. Its main function is to transport the medium gas in the reaction device and provide the required pressure to the reaction device.
Features 1. Designed for specific process flow. 2. The whole machine is skid-mounted and advanced in structure. 3. The compressor types are: Z type, D type, M type. 4. The middle body of the slideway and the cylinder can be designed in different structural forms according to the process requirements.

Reference Technical parameters and specifications

  Model Volume flow(Nm3/h) Suction pressure(Mpa) Exhaust pressure (Mpa) Motor power(kw) Dimension (mm)
1 ZW-0.4/ 2-250 60 0.2 25 18.5 2800*2200*1600
2 ZW-0.81/ (1~3)-25 120 0.1~0.3 2.5 22 1000*580*870
3 DW-5.8/0.5-5 400~500 0.05 0.5 37 2000*1600*1200
4 DW-10/2 510 Atmospheric pressure 0.2 37 2000*1600*1200
5 DW-6.0/5 300 Atmospheric pressure 0.5 37 2000*1600*1200
6 DW-0.21/(20~30)-250 270 2~3 25 45 3200*2200*1600
7 ZW-0.16/60-250 480 6 25 45 3000*2200*1600
8 ZW-0.46 /(5~10)-250 200 0.5~1.0 25 45 3000*2200*1600
9 DW-1.34/2-250 208 0.2 25 55 3400*2200*1600
10 DW-0.6/24-85 720 2.4 8.5 55 2200*1600*1200
11 ZW-2.9/14.2-20 220 1.42 2 55 2200*1600*1200
12 VW-2.0/(2~4)-25 410 0.2~0.4 2.5 55 3400*2200*1600
13 DW-0.85/(3~4)-250 180 0.3~0.4 25 55 2400*1800*1500
14 DW-25-(0.2~0.3)-1.5 1620 0.02~0.03 0.15 75 2400*1800*1500
15 VW-8.0/0.3-25 540 0.03 2.5 90 2400*1800*1500
16 DW-6.8/0.05-40 200~400 0.005 4 90 2400*1800*1500

Lubrication Style: Oil-free
Cooling System: Air Cooling
Cylinder Arrangement: Balanced Opposed Arrangement
Cylinder Position: Vertical
Structure Type: Closed Type
Compress Level: Single-Stage
Customization:
Available

|

air compressor

What Is the Role of Air Dryers in Oil-Free Air Compressor Systems?

Air dryers play a crucial role in oil-free air compressor systems by removing moisture from the compressed air, ensuring dry and moisture-free output. Here’s a detailed explanation of the role of air dryers in oil-free air compressor systems:

1. Moisture Removal:

One of the primary functions of air dryers in oil-free air compressor systems is to remove moisture from the compressed air. During the compression process, atmospheric air is compressed, leading to an increase in temperature. As the compressed air cools down, the water vapor present in the air can condense, resulting in the formation of liquid water. Moisture in the compressed air can cause a range of issues, including corrosion, damage to pneumatic equipment, reduced efficiency in downstream processes, and contamination of products or processes. Air dryers effectively remove this moisture, ensuring that the compressed air remains dry and free from water vapor.

2. Condensation Prevention:

Air dryers also help prevent condensation from occurring within the compressed air system. By removing moisture from the compressed air, air dryers minimize the chances of condensation forming in the compressed air lines, storage tanks, and downstream equipment. Condensation can lead to the accumulation of water, which can cause blockages, corrosion, and other operational issues. Air dryers help maintain the integrity and reliability of the compressed air system by preventing condensation-related problems.

3. Protection of Equipment:

Moisture in the compressed air can be detrimental to pneumatic equipment and tools. Air dryers help protect this equipment by ensuring that the air supplied is dry and free from moisture. Dry air prevents corrosion of internal components, extends the lifespan of pneumatic tools, and helps maintain their optimal performance. By removing moisture, air dryers contribute to the overall reliability and efficiency of the oil-free air compressor system.

4. Purification of Compressed Air:

Air dryers also aid in the purification of compressed air by removing impurities and contaminants, including water vapor, oil droplets, and solid particles. While the primary purpose of air dryers is to remove moisture, they often incorporate additional filtration stages, such as coalescing filters or desiccant beds, to capture and remove other impurities. These filtration stages work in conjunction with the drying process to deliver clean, dry, and purified compressed air that meets the required air quality standards.

5. Optimal Performance:

Properly dried and moisture-free compressed air ensures optimal performance in various applications. In industries such as food and beverage, pharmaceuticals, electronics manufacturing, and painting, where air quality is critical, the use of air dryers is essential to meet specific air purity requirements. Dry compressed air enhances the efficiency and reliability of pneumatic systems, reducing the risk of malfunctions, downtime, and product contamination.

It’s important to note that different types of air dryers are available for oil-free air compressor systems, including refrigerated dryers, desiccant dryers, and membrane dryers. Each type has its own operating principles and suitability for different applications. The selection of the appropriate air dryer depends on factors such as the required level of dryness, the volume of compressed air, operating conditions, and specific industry requirements.

By incorporating air dryers into oil-free air compressor systems, operators can achieve and maintain dry, moisture-free compressed air, ensuring the reliability, efficiency, and integrity of downstream processes and equipment.

air compressor

Can Oil-Free Compressors Be Integrated into Existing Systems?

Yes, oil-free compressors can be integrated into existing systems in many cases. Here’s a detailed explanation of the integration possibilities and considerations when incorporating oil-free compressors into existing systems:

1. Compatibility:

Before integrating an oil-free compressor into an existing system, it’s important to assess the compatibility between the compressor and the system. Consider factors such as the required air pressure and flow rate, the electrical requirements, and the physical space available for installation. Compare these requirements with the capabilities and specifications of the oil-free compressor to ensure a suitable match.

2. Installation:

The installation process may vary depending on the specific system and compressor configuration. In some cases, it may be a straightforward replacement of the existing compressor with the oil-free compressor. However, certain modifications or adjustments may be necessary to accommodate the differences between oil-lubricated and oil-free compressors. For example, oil-free compressors may require additional filtration or moisture removal equipment to maintain the desired air quality. It’s essential to follow the manufacturer’s installation guidelines and consult with qualified professionals if needed.

3. Piping and Connections:

When integrating an oil-free compressor into an existing system, the piping and connections need to be evaluated. The existing piping should be inspected for any potential issues such as leaks, corrosion, or inadequate sizing. Depending on the specific requirements of the oil-free compressor, modifications to the piping system may be necessary to ensure proper airflow, pressure drop, and connection compatibility. It’s crucial to ensure that the piping system can handle the air volume and pressure generated by the oil-free compressor without any restrictions or safety risks.

4. Control and Monitoring:

Integrating an oil-free compressor into an existing system may involve adjustments to the control and monitoring components. The control system should be capable of effectively operating and regulating the oil-free compressor based on the desired air pressure and flow requirements. This may require reprogramming or reconfiguring the control settings to accommodate the specific features and functionalities of the oil-free compressor. Additionally, monitoring systems should be updated to include relevant parameters specific to oil-free compressor operation, such as air purity levels or maintenance alerts.

5. Training and Familiarization:

When integrating an oil-free compressor into an existing system, it’s important to provide training and familiarization to the personnel responsible for operating and maintaining the equipment. The differences between oil-lubricated and oil-free compressors should be clearly explained, including any specific maintenance requirements or operational considerations. Training sessions can help ensure that the staff understands the new equipment and can effectively operate and maintain it in a safe and efficient manner.

6. Benefits and Considerations:

Integrating an oil-free compressor into an existing system offers several benefits. It can improve air quality, eliminate the risk of oil contamination, and enhance the performance and reliability of the compressed air system. However, it’s important to consider the initial investment costs, potential modifications required, and the overall compatibility with the existing system. Conducting a thorough cost-benefit analysis and consulting with experts can help determine the feasibility and potential advantages of integrating an oil-free compressor into the existing system.

In summary, oil-free compressors can generally be integrated into existing systems with proper assessment, planning, and installation procedures. Evaluating compatibility, ensuring appropriate installation, addressing piping and connection requirements, adjusting control and monitoring systems, providing adequate training, and considering the associated benefits and considerations are crucial steps in successfully integrating an oil-free compressor into an existing system.

air compressor

What Are the Advantages of Using Oil-Free Air Compressors?

Oil-free air compressors offer several advantages over their oil-lubricated counterparts. These compressors are designed to deliver clean, oil-free compressed air and provide benefits in various applications. Here’s a detailed explanation of the advantages of using oil-free air compressors:

1. Clean and Oil-Free Air:

The primary advantage of oil-free air compressors is that they produce compressed air that is free from oil contamination. This makes them suitable for applications where oil-free air is crucial, such as in industries like food and beverage, pharmaceuticals, electronics, and painting. Oil-free compressed air ensures product quality, prevents contamination of sensitive equipment, and eliminates the risk of oil-related issues in downstream processes.

2. Reduced Maintenance:

Oil-free compressors generally require less maintenance compared to oil-lubricated compressors. Since there is no oil to change or monitor, maintenance tasks related to oil filtration, oil changes, and oil disposal are eliminated. This can result in cost savings, reduced downtime, and simplified maintenance schedules.

3. Elimination of Oil Contamination Risk:

With oil-free compressors, there is no risk of oil contaminating the compressed air system. This eliminates the need for additional filtration or separation equipment to remove oil from the compressed air. It simplifies the overall system design, reduces the risk of oil-related equipment failure, and minimizes the maintenance and associated costs.

4. Compact and Lightweight:

Oil-free compressors are often designed to be compact and lightweight, making them portable and easy to transport. This feature is advantageous for applications where mobility is required, such as construction sites, workshops, and on-site maintenance tasks.

5. Quiet Operation:

Oil-free compressors tend to operate at lower noise levels compared to oil-lubricated compressors. The absence of oil lubrication reduces the friction and mechanical noise, resulting in quieter operation. This makes oil-free compressors more suitable for noise-sensitive environments or applications where reduced noise levels are desired.

6. Environmental Considerations:

Oil-free air compressors are environmentally friendly due to the absence of oil. They eliminate the risk of oil spills or leaks that can harm the environment. Furthermore, oil-free compressors may require less energy consumption compared to oil-lubricated compressors, contributing to energy efficiency and reduced carbon footprint.

7. Lower Initial Cost:

In general, oil-free compressors tend to have a lower initial cost compared to oil-lubricated compressors. This can be advantageous for applications with budget constraints or when the specific requirements of the application align with the capabilities of oil-free compressors.

It’s important to note that oil-free air compressors may have certain limitations compared to oil-lubricated compressors. They may have lower maximum operating pressures and higher operating temperatures. Additionally, the absence of oil lubrication may result in slightly reduced efficiency and increased wear on certain components over time.

By considering these advantages, users can determine whether oil-free air compressors are suitable for their specific application and requirements.

China Professional Oil Free N2 Methane Gas Air Compressor for Sale   lowes air compressorChina Professional Oil Free N2 Methane Gas Air Compressor for Sale   lowes air compressor
editor by CX 2023-10-07

Recent Posts