China wholesaler CHINAMFG 200kw Screw Type Single Oil Free Dental Air Compressor with Good quality

Product Description

Product Description

1.Atals-Copco Air-End
Atlas-Copco Group 149years air-end research & development experience.

2.High Efficiency & Save Energy
High efficiency & energy saving intake valve,keep in lower unloading pressure and avoid large energy consumption when 

3.Easy Installation & Operation
Compressor is filled with inbrication oil before delivering. You can operate it after installing and power on.

4.Low noise & low vibration
Atlas-copco air-end, low noise & vibration.

5.Reliability & Safety
Reliability bigger cooler, lower operating temperature.

Detailed Photos

Product Parameters

LSW-8A PM-8 8 116 0.5~1.1 10 7.5 510 Air
Cooled
Belt Driven 57±2 G3/4”  —  — 800*800*1200
LSW-8A PM-10 10 145 0.4~0.9
LSW-11A PM-8 8 116 0.7~1.7 15 11 620 Air
Cooled
Direct Driven 60±2 G3/4”  —  — 1200*855*1335
LSW-11A PM-10 10 145 0.6~1.4
LSW-15A PM-8 8 116 1.0~2.3 20 15 670 Air
Cooled
Direct Driven 60±2 G3/4”  —  — 1200*855*1335
LSW-15A PM-10 10 145 0.9~2.0
LSW-18.5A PM-8 8 116 1.2~3.0 25 18.5 730 Air
Cooled
Direct Driven 63±2 G1”  —  — 1400*1571*1340
LSW-18.5A PM-10 10 145 1.0~2.6
LSW-22A PM-8 8 116 1.5~3.6 30 22 780 Air
Cooled
Direct Driven 63±2 G1”  —  — 1400*1571*1340
LSW-22A PM-10 10 145 1.3~3.0
LSW-30A PM -8 8 116 2.1~5.1 40 30 1150 Air
Cooled
Direct Driven 66±2 G1-1/4”  —  — 1650*1180*1505
LSW-30A PM-10 10 145 1.8~4.3
LSW-37A PM-8 8 116 2.6~6.4 50 37 1200 Air
Cooled
Direct Driven 66±2 G1-1/4”  —  — 1650*1180*1505
LSW-37A PM-10 10 145 2.2~5.4
LSW-45W PM-8 8 116 3.3~8.2 60 45 1490 Water
Cooled
Direct Driven 68±2 G2” G1-1/2” 10 1800*1360*1670
LSW-45W PM-10 10 145 2.8~7.0
LSW-55W PM-8 8 116 4.0~10 75 55 1570 Water
Cooled
Direct Driven 69±2 G2” G1-1/2” 12 1800*1360*1670
LSW-55W PM-10 10 145 3.4~8.5
LSW-75W PM-8 8 116 5.2~13.0 75 55 1750 Water
Cooled
Direct Driven 69±2 G2” G1-1/2” 18 1800*1360*1670
LSW-75W PM-10 10 145 4.4~11.1
LSW-90W PM-8 8 116 6.9~17.2 120 90 2450 Water
Cooled
Direct Driven 73±2 G2-1/2” G1-1/2” 20 2200*1550*1800
LSW-90W PM-10 10 145 5.9~14.6
LSW-110W PM-8 8 116 8.2~20.3 150 110 2580 Water
Cooled
Direct Driven 75±2 G2-1/2” G2” 24 2200*1550*1800
LSW-110W PM-10 10 145 7.0~17.3
LSW-132W PM-8 8 116 9.7~24.1 180 132 2700 Water
Cooled
Direct Driven 75±2 G2-1/2” G2” 30 2700*1550*1800
LSW-132W PM-10 10 145 8.2~20.5
LSW-160W PM-8 8 116 11.3~28.2 210 160 3900 Water
Cooled
Direct Driven 77±2 G3” G3” 35 3000*1800*2100
LSW-160W PM-10 10 145 9.6~24.0
LSW-185W PM-8 8 116 12.9~32.1 240 185 4050 Water
Cooled
Direct Driven 77±2 G3” G3” 38 3000*1800*2100
LSV180W PM-10 10 145 11.0~27.3
LSW-200W PM-8 8 116 13.8~34.5 270 200 4200 Water
Cooled
Direct Driven 78±2 G4” G4” 42 3000*1800*2100
LSW-200W PM-10 10 145 11.7~29.3
LSW-220W PM-8 8 116 15.5~38.6 295 220 4400 Water
Cooled
Direct Driven 79±2 G4” G4” 47 3100*1850*2100
LSW-220W PM-10 10 145 13.2~32.8
LSW-250W PM-8 8 116 17.1~42.6 340 250 4800 Water
Cooled
Direct Driven 79±2 G4” G4” 53 3100*1850*2100
LSW-250W PM-10 10 145 14.5~36.2

Company Profile

FAQ

Q1: Are you a manufacturer or trading company?
A1: Xihu (West Lake) Dis.in is professional screw air compressor factory located in HangZhou, China, CHINAMFG is Xihu (West Lake) Dis.in overseas market sales representative.

Q2: Xihu (West Lake) Dis.in is real member of Atlas-copco group?
A2: Yes, in 2571, Sweden Atlas-copco 100% acquired Xihu (West Lake) Dis.in.

Q3: Xihu (West Lake) Dis.in air-end from Atlas-copco?
A3: Yes, Xihu (West Lake) Dis.in LS/LSV, LOH, LSH and CS series air compressors all use Atlas Copco’s air-end.

Q4: What’s your delivery time?
A4: about 10-20days after you confirm the order, other voltage pls contact with us.

Q5: How long is your air compressor warranty?
A5: One year for the whole machine since leave our factory. 

Q6: What’s the payment term?
A6:We accept T/T, LC at sight, Paypal etc.
Also we accept USD, RMB, JPY, EUR, HKD, GBP, CHF, KRW.

Q7: What’s the Min. Order requirement?
A7: 1unit

Q8: What service you can support?
A8: We offer after-sales service, custom service, production view service and one-stop service.

 

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Lubrication Style: Oil-free
Cooling System: Water Cooling
Installation Type: Stationary Type
Type: Single Screw Compressor
Model: Lsw200W Pm-10
Power: 200kw/ 270HP
Samples:
US$ 80517/unit
1 unit(Min.Order)

|
Request Sample

Customization:
Available

|

air compressor

How Do You Ensure the Air Quality Produced by Oil-Free Compressors?

Ensuring the air quality produced by oil-free compressors involves a combination of factors, including proper equipment selection, appropriate maintenance practices, and adherence to industry standards. Here’s a detailed explanation of how to ensure the air quality produced by oil-free compressors:

1. Equipment Selection:

Choosing the right oil-free compressor is the first step in ensuring air quality. It is essential to select a compressor that is specifically designed for applications requiring clean air, such as food and beverage processing, pharmaceutical manufacturing, electronics assembly, and medical facilities. Consideration should be given to the compressor’s filtration capabilities, air treatment options, and compliance with relevant industry standards and regulations.

2. Filtration Systems:

The filtration systems integrated into oil-free compressors play a crucial role in maintaining air quality. These systems typically include pre-filters, coalescing filters, and activated carbon filters. Pre-filters remove larger particles, coalescing filters capture smaller particles and coalesce water vapor, and activated carbon filters absorb odors and remaining oil vapors. Regular inspection and replacement of filters are necessary to ensure their effectiveness in removing contaminants from the compressed air.

3. Regular Maintenance:

Regular maintenance is key to preserving air quality. This includes following the manufacturer’s recommended maintenance schedule, which may involve tasks such as filter replacement, lubrication of non-compressed parts, and inspection of seals and gaskets. Proper maintenance helps prevent air leaks, ensures the compressor operates efficiently, and reduces the risk of contamination.

4. Air Quality Testing:

Periodic air quality testing is essential to verify the effectiveness of the oil-free compressor and its filtration system. Air quality testing can involve measuring parameters such as oil content, particulate matter, moisture levels, and microbiological contamination. By conducting regular air quality tests, any deviations from the desired air quality standards can be identified, allowing for corrective actions to be taken promptly.

5. Compliance with Standards:

Adhering to industry standards and regulations is crucial in ensuring air quality. Standards such as ISO 8573 specify the acceptable limits for contaminants in compressed air, including oil content, particulate matter, and moisture. Compressors should be selected, installed, and operated in accordance with these standards. Regular auditing and certification processes can help ensure ongoing compliance and provide assurance of air quality to stakeholders.

6. Training and Education:

Proper training and education of personnel involved in the operation and maintenance of oil-free compressors are vital. Operators should be familiar with the specific requirements of oil-free compressors, including the importance of filtration, maintenance procedures, and recognizing signs of potential issues. Training programs can help ensure that operators have the necessary knowledge and skills to maintain air quality effectively.

By considering equipment selection, implementing robust filtration systems, conducting regular maintenance, performing air quality testing, complying with standards, and providing appropriate training, the air quality produced by oil-free compressors can be effectively ensured. These measures are essential for applications where air purity is critical, safeguarding product integrity, process efficiency, and the health and safety of personnel.

air compressor

Are There Any Specific Safety Considerations When Using Oil-Free Compressors?

Yes, there are specific safety considerations that should be taken into account when using oil-free compressors. Here’s a detailed explanation of the safety considerations associated with oil-free compressor operation:

1. Electrical Safety:

Oil-free compressors are powered by electricity, so electrical safety measures should be followed. It is important to ensure that the compressor is properly grounded and connected to a suitable power source. Electrical wiring and connections should be inspected regularly to identify any potential hazards such as frayed wires or loose connections. Adequate circuit protection, such as fuses or circuit breakers, should be in place to prevent overloads or short circuits. All electrical work should be performed by qualified personnel in compliance with applicable electrical codes and regulations.

2. Pressure Safety:

Compressed air generated by oil-free compressors can reach high pressures, and proper pressure safety measures should be in place. Pressure relief valves are essential components that protect the compressor and the entire compressed air system from overpressurization. These valves should be properly sized, regularly inspected, and tested to ensure they operate within the specified pressure limits. Pressure gauges should be installed to monitor and display the pressure levels accurately. It is important to avoid exceeding the maximum pressure rating of the compressor and to follow the manufacturer’s guidelines regarding pressure limitations.

3. System Ventilation:

Oil-free compressors generate heat during operation, and adequate ventilation is necessary to prevent overheating. Sufficient airflow around the compressor unit should be maintained to dissipate heat effectively. The compressor should be installed in a well-ventilated area, and any obstructions that could restrict airflow should be avoided. Inadequate ventilation can lead to increased operating temperatures, reduced compressor performance, and potential safety hazards. Manufacturers’ recommendations regarding ventilation requirements should be followed.

4. Preventing Injuries:

When working with oil-free compressors, certain precautions can help prevent injuries. It is important to wear appropriate personal protective equipment (PPE), such as safety glasses, hearing protection, and gloves, when operating or maintaining the compressor. Loose clothing, jewelry, or other items that could get caught in moving parts should be avoided. Compressed air should never be directed towards the body or other individuals, as it can cause serious injuries, such as cuts, bruises, or even pneumothorax. Proper training and clear instructions for safe operation should be provided to all personnel working with the compressor.

5. Maintenance and Inspection:

Regular maintenance and inspection of oil-free compressors are essential for safe operation. The compressor should be inspected for any signs of damage, leaks, or abnormal vibrations. Routine maintenance tasks, such as filter replacements, should be performed according to the manufacturer’s recommendations. Maintenance procedures should be carried out with the compressor turned off and isolated from the power source. Only authorized personnel with the necessary training and knowledge should perform maintenance tasks on the compressor to ensure proper safety protocols are followed.

6. Emergency Preparedness:

Being prepared for potential emergencies is crucial when using oil-free compressors. Emergency shutdown procedures should be established and clearly communicated to all personnel. Adequate fire suppression equipment, such as fire extinguishers, should be readily available and properly maintained. In the event of a compressor-related incident, personnel should be trained on emergency response protocols and evacuation procedures.

It is important to consult the manufacturer’s documentation and guidelines for specific safety considerations related to the oil-free compressor model being used. Additionally, adherence to relevant safety regulations and standards, as well as regular safety training and awareness programs, further contribute to maintaining a safe working environment when using oil-free compressors.

air compressor

What Industries Commonly Use Oil-Free Air Compressors?

Oil-free air compressors are utilized in various industries where clean and oil-free compressed air is essential for specific applications. These industries rely on oil-free compressors to ensure product quality, maintain equipment integrity, and meet industry regulations. Here’s a detailed explanation of the industries commonly using oil-free air compressors:

1. Food and Beverage:

The food and beverage industry extensively employs oil-free air compressors. These compressors are used in processes such as food packaging, filling, bottling, and product drying. Oil-free compressors prevent oil contamination, ensuring product quality, food safety, and compliance with industry regulations. They help maintain the freshness of food products, prevent flavor or odor contamination, and minimize the risk of product spoilage.

2. Pharmaceutical and Healthcare:

In the pharmaceutical and healthcare sectors, oil-free air compressors are vital for maintaining the purity and integrity of medical gases, powering respiratory devices, and supporting laboratory applications. Oil-free compressors deliver clean and uncontaminated compressed air for critical processes, such as ventilators, nebulizers, surgical instruments, dental tools, and laboratory testing. They ensure patient safety, regulatory compliance, and reliable operation in these sensitive environments.

3. Electronics and Semiconductor:

The electronics and semiconductor industries require oil-free air compressors for various applications. These compressors are used in cleanrooms and manufacturing processes where air quality is crucial to prevent contamination of sensitive electronic components. Oil-free compressors provide clean and dry compressed air for applications like chip manufacturing, circuit board assembly, and air knife systems. They help ensure the reliability and quality of electronic products while minimizing the risk of particle contamination.

4. Automotive and Aerospace:

In the automotive and aerospace industries, oil-free air compressors are utilized for painting, coating, and pneumatic tools. These compressors deliver clean, oil-free compressed air, ensuring high-quality finishes and preventing oil contamination that could affect adhesion or cause defects. Oil-free compressors play a critical role in maintaining the precision and reliability of pneumatic tools used in assembly lines, manufacturing processes, and aircraft maintenance.

5. Textile and Garment:

The textile and garment industries rely on oil-free air compressors for various applications, including powering pneumatic tools, air agitation in dyeing processes, and providing clean compressed air for textile manufacturing. Oil-free compressors prevent oil contamination that could stain or damage fabrics, ensuring product quality and minimizing the risk of production defects. They help maintain efficiency and reliability in textile production while meeting strict quality standards.

6. Chemical and Petrochemical:

The chemical and petrochemical industries utilize oil-free air compressors in critical processes where air purity is essential. These compressors are used in applications such as air sparging, pneumatic conveying, and instrument air supply. Oil-free compressors ensure that the compressed air does not introduce contaminants, ensuring the integrity of chemical reactions, preventing product contamination, and maintaining the safety of equipment and personnel.

7. Research and Laboratories:

Research facilities and laboratories across various industries rely on oil-free air compressors for a wide range of applications. These include air supply for analytical instruments, sample preparation, cell culture, and other research processes. Oil-free compressors provide clean and reliable compressed air, ensuring accurate test results, preventing contamination, and maintaining the integrity of samples and experiments.

It’s important to note that while these industries commonly use oil-free air compressors, the specific requirements may vary based on the application and industry standards. Selecting the appropriate oil-free compressor and adhering to recommended maintenance practices are crucial to achieve optimal performance and meet industry-specific needs.

China wholesaler CHINAMFG 200kw Screw Type Single Oil Free Dental Air Compressor   with Good qualityChina wholesaler CHINAMFG 200kw Screw Type Single Oil Free Dental Air Compressor   with Good quality
editor by CX 2024-04-22

Recent Posts